vmware设定外连

VPC==>VM建立的伺服器
1.先确认VPC是否可以上网
2.确认VPC与实体是否在同一网段->如果不是则你选了NAT模式
3.VPC是否有防火墙…先关,测试成功再开
4.你是否有装两张(含)以上的网路卡,要在VMware Network中设置正确。
预设是选Nat:used to share the host's ip address
请把他改为Bridged:connected directly to the physical network
至于Replicate physical network connection state 请依照自己的需求设定
Bridged:connected directly to the physical network (桥接：直接连接到实际网络)
Replicate physical network connection state(複製实际网络连接状态)
Nat:used to share the host's ip address (共享主机的IP地址)
Host-only:a private network shared with the host (专用网络与主机共享)
Custom:specific virtual network (自定义：特定的虚拟网络)

http://blog.faq-book.com/?p=276